Circuits
Timing
TimerBlox
Circuits
Timing & Frequency
Pulse Generators & One Shots
Circuits
Motor & Solenoid Control
Motor & Solenoid FET Driver
Application
Loading
Function
Matching Circuits
The Following Circuits match the search criteria selected above.
1MHz Pulse Width Modulator 8 Second to 8.5 Minute Low Frequency Clock (Intervalometer for Time-Lapse Photography) Acoustic Thermometry Measures Temperature To 0.1 Degree Consecutive Test Sequencer Crossover Gate—Break-Before-Make Interval Timer Delayed One Shot Energy-Tripped Circuit Breaker Trips After a Time Interval That Varies as a Function of Sensed Load Current Isolated PWM (5% to 95%) Controller Light to Frequency Converter Motor Speed/Direction Control for Full H-Bridge (Locked Anti-Phase Drive) On-Time Programmable Pulsed Solenoid Driver Pulse Staircase Ramp Generator Quadrature Sine Wave Oscillator. Voltage Controlled Frequency Range from 2Hz to 18kHz with 1VP-P Constant Output Amplitude Ratiometric Sensor to Pulse Width, Non-Inverting Response Simple Diode Temperature Sensor With Frequency Output Simplified DC Motor Torque Control Temperature to Frequency Converter Voltage Controlled Oscillator with 16:1 Frequency Range
The LTC6993 is a monostable multivibrator (also known as a “one-shot” pulse generator) with a programmable pulse width of 1μs to 33.6 seconds. The LTC6993 is part of the TimerBlox family of versatile silicon timing devices. A single resistor, RSET, programs an internal master oscillator frequency, setting the LTC6993’s time base. The output pulse is initiated by a transition on the trigger input (TRIG). Each part can be configured to generate positive or negative output pulses. The LTC6993 is available in four versions to provide different trigger signal polarity and retrigger capability.
