Circuits
Current Sense & Source
High Side Current Sense
Circuits
Power Management
System Supervisor, Monitor and Control
Power Monitors
Application
Any
Loading
Function
System Supervisor, Monitor and Control
Matching Circuits
The Following Circuits match the search criteria selected above.
1-Cell Monitor with Bottom-Side Sense 12.5W PWM Heat Source 120W Supply Monitor Includes ICC of LT2940 12V 1.5A Buck Regulator With Virtual Remote Sense 24V Overvoltage Regulator Withstands 150V at VIN 28V Power to Frequency Converter 28V Vehicle Application with Reverse Voltage Protection 48V Power Monitor With Opto-Isolated Serial Interface 4A, 12V Overvoltage Output Regulator 5V System Protected from ± 24V Power Supplies 5V System Protected from ±24V Power Supplies and Overcurrent 5V System Protected From 80V Overvoltage AC Power and Current Monitor Adjustable 0W to 10W Load Box with UVLO and Thermal Shutdown An Automotive Halogen Headlamp Power Supply Complete 12V Automotive Undervoltage, Overvoltage and Reverse-Supply Protection Circuit Computer Voltage and Temperature Monitoring Fully Isolated AC Power and Current Monitor High Side Current, Input Voltage and Open Fuse Monitoring with a Single LTC4151 High Side Power Sensing with Onboard ADC and I2C High Side Power Sensing with Onboard ADC and I2C High Voltage/Current and Temperature Monitoring Integrating Watt-Hour Meter Internal Temperature Sensor Isolated Current and Voltage Monitor Isolated Power Supply with Virtual Remote Sense Liquid-Level Indicator Load Monitor Alarms Above 60W LTC4151 Interfaces with Isolation Barrier in -48V ATCA Application Motor Monitor with Circuit Breaker Motor Protection/Regulation Motor Protection/Regulation Oscillator/Reference Oven Temperature Regulation Overvoltage Regulator with 250V Surge Protection Overvoltage Regulator with Low Battery Detection and Output Keep Alive During Shutdown Protection from Overvoltage and Overcurrent Protection of USB Port from Overvoltage and Overcurrent Pushbutton on/off control for battery-powered device, with automatic turn-on when the device is plugged in Remote CPU/ASIC/FPGA Temperature Sensor SCR Crowbar Secondary-Side AC Circuit Breaker System Monitor with Instrumentation-Grade Accuracy Used to Measure Relative Humidity Temperature Monitoring with an NTC Thermistor While Measuring Load Current and LTC4151 Supply Current Thermocouple Thermometer with Cold Junction Compensation Wet Bulb Psychrometer Wide Input Range 10W PWM Heat Source Wind Direction and Airflow Measurement
High Side Power Sensing with Onboard ADC and I2C
The LTC4151 is a high side power monitor that operates over a wide voltage range of 7V to 80V. In default operation mode, the onboard 12-bit ADC continuously measures high side current, input voltage and an external voltage. Data is reported through the I2C interface when polled by a host.